Finger Pulse Oximeter with Spo2 Waveform

Finger pulse oximeter establishes a data processing formula with Lambert Beer Law according to  the reduction of hemoglobin and oxyhemoglobin in the absorption spectrum of red and near-infrared region. Spo2 waveform is gradually becoming a standard feature of current finger oximeters.

How to use a finger oximeter?

1.Press reset key of finger pulse oximeter, screen of spo2 finger monitor shows standby state.

2.Press opening of spo2 finger monitor. Put middle finger of left or right hand into working bin of fingertip oximeter. You can see the infrared light of working bin is on.

3.After the full contact between the finger and the warehouse, screen of spo2 finger monitor shows the detection process. (Note:when it is detection state, maintain the stability of the tested finger in the finger pulse oximeter.Do not swing up and down.)

4.After 30 seconds, release the detected finger.The test results are shown. At the top of the screen of finger pulse oximeter ,%SpO2 is a blood oxygen index. The Min at the bottom of the screen is the pulse rate.Spo2 wave form is also shown.

Evaluation of finger oximeter detection result

According to medical analysis standard, oxygen content in the blood not less than 95 is normal index. Pulse of each minute between 60-100 times is normal index. If the values you detected with finger pulse oximeter are not in line with the above two indicators, please check 2-3 times at different time points , and maintain 2-3 days of continuous testing. If the value is still not up to the standard, it is recommended that you go to the hospital for detailed diagnosis.

Power supply: 1.5V (AAA size) alkaline batteries *2

Package: 1pc/box, 100 boxes per carton

Optional package: 1 pc/protection pack, 1 pack/box, 100 boxes per carton

International certification: CE & FDA