Finger Pulse Oximeter FDA Approved

Certification:

Customers in America needs finger pulse oximeter FDA Approved. Except for CE certification , our finger pulse oximeter is also FDA Approved and has 510k number.

Working principle:

The working principle of the instrument is to use photoelectric blood oxygen detection technology combined with volume pulse tracking technology. Two different wavelengths of light (660 nm red light and 940 nm near-infrared light) are used to illuminate the fingertips of the human body through a see-through pinch sensor. The information obtained is processed by electronic circuits and microprocessors and the results are displayed by two sets of LEDs.

Application:

Finger Pulse Oximeter FDA Approved can detect human blood oxygen saturation and heart rate by finger. This product is suitable for families, hospitals (including internal surgery, anesthesiology, pediatrics, emergency room, etc.), oxygen bar, community medicine and sports care. It can be used before and after exercise and is not recommended for use during exercise.

Tip:normal range of oxygen content tested by finger pulse oximeter

Medical analysis shows that the normal range of oxygen content (oxygen saturation) in blood is 94%-100% at low altitude, and the pulse rate in quiet state is between 60-100 times per minute. If the value of your test does not meet the above indicators, please monitor 2-3 times in different time of the day, and keep continuous monitoring for 2-3 days. If the value still does not meet the standard value, you are advised to go to the hospital for detailed consultation.